Hardwood

  • Construction Materials /
  • Plywood & Hardwood -
  • Hardwood

Hardwood

Machining - Average of 5 operations: Planing, shaping, turning, boring and mortising (High of 10). Resistance To Splitting - Resistance to splitting from nail or screw (High of 10).

Machining - Average of 5 operations: Planing, shaping, turning, boring and mortising (High of 10). Resistance To Splitting - Resistance to splitting from nail or screw (High of 10).

Hardwood

Resistance To Splitting - Resistance to splitting from nail or screw (High of 10). 

Joint Strength - Average of side and end grain screw holding ability measured in shear factor and converted for comparison (High of 10). 

Gluing - Total Bond Strength (High of 10). 

Sanding/Polishing - Resistance to fuzzing (High of 10). 

Finishing - Ability to absorb stain evenly, take oil and water based finishes without bleaching (High of 10). 

Specific Gravity - Green volume, oven dry weight. 

Weight Per Cubic Foot - Lbs at 12% moisture content. 

Weight per MBF - Lbs per 1000 board feet at 12% moisture content, 4/4 rough. 

Hardness - Pressure to bury half of 1.13cm ball perpendicular to the grain (High of 10). 

Shrinkage Volume - Percent of across grain shrinkage from green to 6% moisture content.  

Static Bending - Resistance to rupture (High of 10). 

Impact Bending - Resistance to fiber stress (High of 10). 

Compression - Crushing strength, resistance to weight applied parallel to grain (High of 10). 

Dimensional Stability - Resistance to expansion and contraction due to climatic variations (High of 10).

Interested in working with us? Contact us today

ONE ROOF SOURCE FOR GLOBAL PRODUCTS.

Contact Us